Home  Photonics Fiber Component Products 1064nm Products 1064nm Isolator Polarization Beam Combiner/SplitterInfo: Your browser does not accept cookies. If you want to put products into your cart and purchase them you need to enable cookies.
1064nm Isolator Polarization Beam Combiner/Splitter
|
(IPBC/IPBS Series)
The 1064nm Isolator Polarization Beam Combiner/Splitter is a compact devices which provides both polarization
beam combining and optical isolation in one integrated component. The most common application is to combine
the light of two pump lasers into a single fiber to double the pump power to an Erbium-Doped Fiber Amplifier
(EDFA)or a Raman Amplifier. Due to IPBC/IPBS has extremely low insertion loss it can improve the amplifier
performance.
| Specifications |
| Parameters |
Unit |
Single stage |
| Center Wavelength |
nm |
1064 |
| Operating Wavelength Range |
nm |
± 5 |
| Typ. Insertion Loss |
dB |
1.8 |
| Max. Insertion Loss |
dB |
2.1 |
| Typ. Isolation |
dB |
35 |
| Min. Isolation |
dB |
23 |
| Min. Extinction Ratio (for splitter only) |
dB |
20 |
| Min.Return Loss |
dB |
50 |
| Min.Directivity |
dB |
50 |
| Max. Optical Power (CW) |
mW |
300 |
| Fiber Type |
|
PM 980 Panda Fiber on port 1 and 2, HI 1060 or PM Panda Fiber on Port3 |
| Max. Tensile Load |
N |
5 |
| Operating Temperature |
°C |
-5 to + 50 |
| Storage Temperature |
°C |
-40 to +85 |
| *Above specifications are for device without connector. |
| *For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, and ER will be 2dB lower. |
Package Dimensions
Ordering Information
IPBC -①-②②-③-④-⑤-⑥
IPBS -①-②②-③-④-⑤-⑥
|
|
①: Stage
1-Single Stage
②②: Wavelength
06 - 1064nm
SS - Specify
③: Connector Type
1 - FC/UPC
2 - FC/APC
3 - SC/UPC
4 - SC/APC
N - None
S - Specify
|
④: Fiber Type
B- 250um Panda Fiber
D- 400um Panda Fiber
L- 900um loose tube Panda Fiber
S - Specify
⑤: Fiber Type for Port 3
1 - HI 1060 fiber
2 - Slow axis align 45ƒ to output 1
3 - Slow axis align to output 1
S - Specify
|
⑥: Fiber Length
Q - 0.75m
S - Specify
|
Remark: The PM fiber and the connector key are aligned to the slow axis
If port 3 is HI1060 fiber, 250um bare fiber will be used when 250um or
400um Panda Fiber is selected for port 1 and 2
|
|
|
|
|
|
|
|
