Home arrow Photonics arrow Fiber Laser Products arrow EDFA / YDFA PM Fiber Laser Module
Info: Your browser does not accept cookies. If you want to put products into your cart and purchase them you need to enable cookies.

EDFA / YDFA PM Fiber Laser Module

NovaWave introduces our recently developed polarization maintaining (PM) fiber laser and fiber amplifier modules. The Erbium Doped Fiber Amplifier /Yterbium Doped Fiber Amplifier EDFA/YDFA-PM series presently includes 1.06 micron and 1.55 micron region versions, featuring all polarization maintaining architectures with output powers up to 2W. Our single frequency fiber laser modules include versions with linewidths ranging from less than 100kHz to several MHz in both the Yb and Er lasing regions. The SFL-PM series products provide a less expensive and higher power alternative to DFB fiber lasers operating in these same regions. NovaWave’s fiber laser modules produce single longitudinal and transverse mode laser radiation in a compact package that includes the driver electronics and on-board diagnostics. SFL-PM series systems are available at standard as well as custom wavelengths across the Yb and Er lasing regions. Modules require external heat-sinking for output powers above 200mW.

edf_ydfapmmodule.jpg

The SFL series lasers are suitable for applciations that require narrow linewidth, stable output power, high polarization purity and wavelength stability. The amplifier modules include single and dual stage amplification versions depending on the seed power supplied. The modules can be purchased with our recently developed (external) high power fiber-coupled isolators in the 1-micron region, while 1.5 micron sytems include single or dual stage isolation

Features

  • Compact OEM form factor, 1” thick
  • Polarization maintaining throughout
  • High wallplug efficiency
  • 100mW to 2W output power levels
  • Custom wavelengths and configurations available
  • Low ASE and high PER
  • High wallplug efficiency
  • Analog or RS232 interface
  • Custom fiber inputs/outputs available
  • Made in the USA

Preliminary Specifications

Available Wavelengths1: 1050nm-1100nm, 1530-1565nm
Linewidth: <100kHz to several MHz
Output power: up to 2W 1064, up to 1W 1550
Standard Wavelengths: 1064nm, 1074nm, 1530-1565nm
Transverse Mode: TEM00, singlemode fiber
Power Requirements: 12VDC, (1064nm <2A2)
Weight (kg): <1 kg
Size (mm): 200x120x25
Interlocks: External
Interface: Analog (RS232 optional)
Operational Modes: Constant current or power
Optical Isolation: Up to 50dB (@1550)
Polarization extinction ratio (PER): 16-20dB


1: May require additional charge
2: 1064nm SFL @ 2W output
*All specifications subject to change without notice

 

EDFA / YDFA PM Fiber Laser Module Brochure